Immobiliser

Procedure:

                    Engine Immobiliser

Purpose :

                An Immobiliser that runs of a hidden switch.

Test Vehicle:

                My Supra MkIII Jan 1991

Skills needed:

                Wire stripping/splicing

Equipment needed :

                Wire Strippers / Cutters
                Wire (Good Quality)
                Elec. tape
                Solderless connectors
                off/on Switch, mountable

Procedure

Access  coil wires
        It's in the engine bay, next to the fuse block and battery. It comes off the Toyota Ignitor Assy.
        Locate brown-black wire with a brown speckle.  Make sure it has the brown speckle and not the RED.
        Plug wires into top or splice into bottom of block (Tap into, DO not remover stock wiring ) Make sure your
          wire is the same quality and thickness as the stock.
        Feed you wires into the cabin (I went through the rubber socket leading to the glove box)

Connect Switches
        Use an easy access off/on push button.
        Place the wire connected to Brown-Black cable to PIN 1
        Connect  PIN 2 to a good earth.
 

Martin Bradshaw
25/01/99